document number: 94392 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 17-sep-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 phase control thyristors (stud version), 80 a 80ria...pbf, 81ria...pbf, 82ria...pbf series vishay semiconductors features ? hermetic glass-metal seal ? international standard case to-209ac (to-94) ? compliant to rohs directive 2002/95/ec ? designed and qualified for industrial level typical applications ? dc motor controls ? controlled dc power supplies ? ac controllers electrical specifications product summary i t(av) 80 a to-209ac (to-94) major ratings and characteristics parameter test conditions values units i t(av) 80 a t c 85 c i t(rms) 125 a i tsm 50 hz 1900 60 hz 1990 i 2 t 50 hz 18 ka 2 s 60 hz 16 v drm /v rrm 400 to 1200 v t q typical 110 s t j - 40 to 125 c voltage ratings type number voltage code v drm /v rrm , maximum repetitive peak and off-state voltage v v rsm , maximum non-repetitive peak voltage v i drm /i rrm maximum at t j = 125 c ma 80ria 81ria 40 400 500 15 80 800 900 120 1200 1300
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94392 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 17-sep-10 80ria...pbf, 81ria...pbf, 82ria...pbf series vishay semiconductors phase control thyristors (stud version), 80 a absolute maximum ratings parameter symbol test conditions values units maximum average on-state current at case temperature i t(av) 180 conduction, half sine wave 80 a 85 c maximum rms on-state current i t(rms) dc at 75 c case temperature 125 a maximum peak, one-cycle non-repetitive surge current i tsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 1900 t = 8.3 ms 1990 t = 10 ms 100 % v rrm reapplied 1600 t = 8.3 ms 1675 maximum i 2 t for fusing i 2 t t = 10 ms no voltage 18 ka 2 s t = 8.3 ms 16 t = 10 ms 100 % v rrm reapplied 12.7 t = 8.3 ms 11.7 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 180.5 ka 2 ? s low level value of threshold voltage v t(to)1 (16.7 % x ? x i t(av) < i < ? x i t(av) ), t j = t j maximum 0.99 v high level value of threshold voltage v t(to)2 (i > ? x i t(av) ), t j = t j maximum 1.13 low level value of on-state slope resistance r t1 (16.7 % x ? x i t(av) < i < ? x i t(av) ), t j = t j maximum 2.29 m ? high level value of on-state slope resistance r t2 (i > ? x i t(av) ), t j = t j maximum 1.84 maximum on-state voltage v tm i pk = 250 a, t j = 25 c, t p = 10 ms sine pulse 1.60 v maximum holding current i h t j = 25 c, anode supply 12 v resistive load 200 ma typical latching current i l 400 switching parameter symbol test conditions values units maximum non-repe titive rate of rise of turned-on current di/dt t j = 125 c, v d = rated v drm , i tm = 2 x di/dt snubber 0.2 f, 15 ? , gate pulse: 20 v, 65 ? , t p = 6 s, t r = 0.5 s per jedec standard rs-397, 5.2.2.6. 300 a/s typical delay time t d gate pulse: 10 v, 15 ? source, t p = 6 s, t r = 0.1 s, v d = rated v drm , i tm = 50 adc, t j = 25 c 1 s typical turn-off time t q i tm = 50 a, t j = t j maximum, di/dt = - 5 a/s, v r = 50 v, dv/dt = 20 v/s, gate bias: 0 v 25 ? , t p = 500 s 110 blocking parameter symbol test conditions values units maximum critical rate of rise of off-state voltage dv/dt t j = 125 c exponential to 67 % rated v drm 500 v/s maximum peak reverse and off-state leakage current i rrm , i drm t j = 125 c rated v drm /v rrm applied 15 ma
document number: 94392 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 17-sep-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 80ria...pbf, 81ria...pbf, 82ria...pbf series phase control thyristors (stud version), 80 a vishay semiconductors triggering parameter symbol test co nditions values units maximum peak gate power p gm t j = t j maximum, t p ? 5 ms 12 w maximum average gate power p g(av) t j = t j maximum, f = 50 hz, d% = 50 3 maximum peak positi ve gate current i gm t j = t j maximum, t p ? 5 ms 3a maximum peak positive gate voltage + v gm 20 v maximum peak negative gate voltage - v gm 10 maximum dc gate curren t required to trigger i gt t j = - 40 c maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 6 v anode to cathode applied 270 ma t j = 25 c 120 t j = 125 c 60 maximum dc gate voltag e required to trigger v gt t j = - 40 c 3.5 v t j = 25 c 2.5 t j = 125 c 1.5 dc gate current not to trigger i gd t j = t j maximum maximum gate curren t/voltage not to trigger is the ma ximum value which will not trigger an y unit with rated v drm anode to cathode applied 6ma dc gate voltage not to trigger v gd 0.25 v thermal and mechanical specifications parameter symbol test conditions values units maximum operating junction temperature range t j - 40 to 125 c maximum storage temperature range t stg - 40 to 150 maximum thermal resistance, junction to case r thjc dc operation 0.30 k/w maximum thermal resistance, case to heatsink r thcs mounting surface, smooth, flat and greased 0.1 mounting torque, 10 % non-lubricated threads 15.5 (137) n m (lbf in) lubricated threads 14 (120) approximate weight 130 g case style see dimensions - link at the end of datasheet to-209ac (to-94)
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94392 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 17-sep-10 80ria...pbf, 81ria...pbf, 82ria...pbf series vishay semiconductors phase control thyristors (stud version), 80 a note ? the table above shows the increment of thermal resistance r thjc when devices operate at different conduction angles than dc fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - on-state po wer loss characteristics ? r thjc conduction conduction angle sinusoidal conduction rectangular conduction test conditions units 180 0.042 0.030 t j = t j maximum k/w 120 0.050 0.052 90 0.064 0.070 60 0.095 0.100 30 0.164 0.165 80 90 100 110 120 130 0 102030405060708090 maximum allowable case temperature (c) 30 60 90 120 180 average on-state current (a) conduc tion angle 80ria series r (dc) = 0.30 k/w thjc 70 80 90 100 110 120 130 020406080100120140 dc 30 60 90 120 180 average on-state current (a) maximum allowable case temperature (c) conduction period 80ria series r (dc) = 0.30 k/w thjc 0255075100125 maximum allowable ambient temperature (c) 0 . 6 k / w 1 k / w 2 k / w 5 k / w 3 k / w 1 . 4 k / w r = 0 . 4k / w - d e l t a r t h s a 0 10 20 30 40 50 60 70 80 90 100 110 120 0 10 20 30 40 50 60 70 80 180 120 90 60 30 rm s li m i t conduction angle maximum average on-st ate pow er loss (w) average on-state current (a) 80ria series t = 125c j
document number: 94392 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 17-sep-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 5 80ria...pbf, 81ria...pbf, 82ria...pbf series phase control thyristors (stud version), 80 a vishay semiconductors fig. 4 - on-state power loss characteristics fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current fig. 7 - on-state volt age drop characteristics 0255075100125 maximum allowable ambient temperature (c) r = 0 . 4 k / w - d e l t a r t h s a 0 . 6 k / w 1 k / w 1 . 4 k / w 2 k / w 3 k / w 5 k / w 0 20 40 60 80 100 120 140 160 180 0 20406080100120140 dc 180 120 90 60 30 rm s li m i t conduction period maximum average on-state power loss (w) average on-state current (a) 80ria serie s t = 125c j 800 1000 1200 1400 1600 1800 110100 number of eq ua l amp litud e half cyc le current pulses (n) peak half sine wave on-state current (a) at 60 hz 0.0083 s at 50 hz 0.0100 s 80ria series at any rated load condition and with rated v applied following surge. rrm initial t j = 125c 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 0.01 0.1 1 pu lse tra in du ra t io n ( s) versus pulse train duration. control of conduction may not be maintained. peak half sine wave on-state current (a) initial t = 125c no voltage reapplied rated v reapplied rrm j 80ria series maximum non repetitive surge current 1 10 100 1000 10000 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 t = 25c j instantaneous on-state current (a) in st a n t a n e o u s o n - st a t e v o lt a g e ( v ) t = 125c j 80ria series
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94392 6 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 17-sep-10 80ria...pbf, 81ria...pbf, 82ria...pbf series vishay semiconductors phase control thyristors (stud version), 80 a fig. 8 - thermal impedance z thjc characteristics fig. 9 - gate characteristics ordering information table links to related documents dimensions www.vishay.com/doc?95362 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 sq uare wave pulse duration (s) thjc 80ria series steady state value r = 0.30 k/w (dc operation) transient thermal impedance z (k/w) thjc 0.1 1 10 100 0.001 0.01 0.1 1 10 100 1000 vgd igd (b) (a) tj=25 c tj=125 c tj=-40 c (1) (2) (3) instantaneous gate current (a) instantaneous gate voltage (v) rectangular gate pulse a) recommended load line for b) recommended load line for frequency limited by pg(av) tr<=1 s rated di/dt : 20v, 30ohms; tr<=0.5 s <=30% rated di/dt : 20v, 65ohms (1) pgm = 100w, tp = 500s (2) pgm = 50w, tp = 1ms (3) pgm = 20w, tp = 2.5ms (4) pgm = 10w, tp = 5ms device: 80ria series (4) 1 -i tav x 10 a 3 - ria = essential part number 4 6 - lead (pb)-free - voltage code x 100 = v rrm (see voltage ratings table) 5 - none = stud base 1/2"-20unf- 2 a threads m = stud base metric threads m12 x 1.75 e 6 2 - 0 = eyelet terminals (gate and auxiliary cathode leads) 1 = fast-on terminals (gate and auxiliary cathode leads) 2 = flag terminals (gate and auxiliary cathode terminals) device code 5 1 3 2 4 6 8 0 ria 120 m pbf
document number: 95362 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 17-sep-10 1 to-209ac (to-94) for 80ria series outline dimensions vishay semiconductors dimensions in millimeters (inches) fast-on terminals c.s. 0.4 mm 2 white shrink red shrink red cathode red silicon rubber ? 4.3 (0.17) 10.0 (0.39) max. (0.0006 s.i.) glass metal seal ? 8.5 (0.33) 16.5 (0.65) max. ? 23.5 (0.92) max. c.s. 16 mm 2 (0.025 s.i.) flexible lead 2.5 (0.10) max. 29.5 (1.16) max. 1/2"-20unf-2a sw 27 9.5 (0.37 ) min. white gate amp. 280000-1 ref-250 20 (0.79) min. 24 (0.94) max. 21 (0.83) max. 157 (6.18) 170 (6.69) 55 (2.17) min. 215 10 (8.46 0.39)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
